Downloads:

892

Downloads of v 1.7:

270

Last Update:

26 Apr 2016

Package Maintainer(s):

Software Author(s):

  • FollowMee LLC

Tags:

followmee admin

FollowMee GPS Tracker

This is not the latest version of FollowMee GPS Tracker available.

1.7 | Updated: 26 Apr 2016

Downloads:

892

Downloads of v 1.7:

270

Maintainer(s):

Software Author(s):

  • FollowMee LLC

FollowMee GPS Tracker 1.7

This is not the latest version of FollowMee GPS Tracker available.

All Checks are Passing

2 Passing Test


Validation Testing Passed


Verification Testing Passed

Details

To install FollowMee GPS Tracker, run the following command from the command line or from PowerShell:

>

To upgrade FollowMee GPS Tracker, run the following command from the command line or from PowerShell:

>

To uninstall FollowMee GPS Tracker, run the following command from the command line or from PowerShell:

>

NOTE: This applies to both open source and commercial editions of Chocolatey.

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

  • Open Source or Commercial:
    • Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://chocolatey.org/api/v2. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
    • You can also just download the package and push it to a repository Download

3. Enter your internal repository url

(this should look similar to https://chocolatey.org/api/v2)

4. Choose your deployment method:


choco upgrade followmee -y --source="'STEP 3 URL'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:


choco upgrade followmee -y --source="'STEP 3 URL'"
$exitCode = $LASTEXITCODE

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0
}

Exit $exitCode

- name: Ensure followmee installed
  win_chocolatey:
    name: followmee
    state: present
    version: 1.7
    source: STEP 3 URL

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.

Coming early 2020! Central Managment Reporting available now! More information...


chocolatey_package 'followmee' do
  action    :install
  version  '1.7'
  source   'STEP 3 URL'
end

See docs at https://docs.chef.io/resource_chocolatey_package.html.


Chocolatey::Ensure-Package
(
    Name: followmee,
    Version: 1.7,
    Source: STEP 3 URL
);

Requires Otter Chocolatey Extension. See docs at https://inedo.com/den/otter/chocolatey.


cChocoPackageInstaller followmee
{
   Name     = 'followmee'
   Ensure   = 'Present'
   Version  = '1.7'
   Source   = 'STEP 3 URL'
}

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.


package { 'followmee':
  provider => 'chocolatey',
  ensure   => '1.7',
  source   => 'STEP 3 URL',
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.


salt '*' chocolatey.install followmee version="1.7" source="STEP 3 URL"

See docs at https://docs.saltstack.com/en/latest/ref/modules/all/salt.modules.chocolatey.html.

5. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

Private CDN cached downloads available for licensed customers. Never experience 404 breakages again! Learn more...

This package was approved by moderator doc on 26 Apr 2016.

Description

GPS Tracker by FollowMee converts your mobile device (phone or tablet) into a GPS tracking device.


tools\chocolateyinstall.ps1
$ErrorActionPreference = 'Stop';

$packageName= 'followmee'
$toolsDir   = "$(Split-Path -parent $MyInvocation.MyCommand.Definition)"
$url        = 'https://www.followmee.com/download/setup_followmee.exe'

$packageArgs = @{
  packageName   = $packageName
  unzipLocation = $toolsDir
  fileType      = 'EXE'
  url           = $url
  url64bit      = $url

  validExitCodes= @(0, 3010, 1641)
  silentArgs   = '/s /v"/qn"'

  softwareName  = 'followmee*'
  checksum      = 'c6f057aec3bebb1a9fbbea4d3e1184fb'
  checksumType  = 'md5'
}

Install-ChocolateyPackage @packageArgs
tools\chocolateyuninstall.ps1
# IMPORTANT: Before releasing this package, copy/paste the next 2 lines into PowerShell to remove all comments from this file:
#   $f='c:\path\to\thisFile.ps1'
#   gc $f | ? {$_ -notmatch "^\s*#"} | % {$_ -replace '(^.*?)\s*?[^``]#.*','$1'} | Out-File $f+".~" -en utf8; mv -fo $f+".~" $f

# If this is an MSI, cleaning up comments is all you need.
# If this is an exe, change installerType and silentArgs
# Auto Uninstaller should be able to detect and handle registry uninstalls (if it is turned on, it is in preview for 0.9.9).

$ErrorActionPreference = 'Stop'; # stop on all errors

$packageName = 'followmee'
$softwareName = 'followmee*' #part or all of the Display Name as you see it in Programs and Features. It should be enough to be unique
$installerType = 'MSI'
#$installerType = 'EXE'

$silentArgs = '/qn /norestart'
# https://msdn.microsoft.com/en-us/library/aa376931(v=vs.85).aspx
$validExitCodes = @(0, 3010, 1605, 1614, 1641)
if ($installerType -ne 'MSI') {
  # The below is somewhat naive and built for EXE installers
  # Uncomment matching EXE type (sorted by most to least common)
  #$silentArgs = '/S'           # NSIS
  #$silentArgs = '/VERYSILENT /SUPPRESSMSGBOXES /NORESTART /SP-' # Inno Setup
  #$silentArgs = '/s'           # InstallShield
  #$silentArgs = '/s /v"/qn"' # InstallShield with MSI
  #$silentArgs = '/s'           # Wise InstallMaster
  #$silentArgs = '-s'           # Squirrel
  #$silentArgs = '-q'           # Install4j
  #$silentArgs = '-s -u'        # Ghost
  # Note that some installers, in addition to the silentArgs above, may also need assistance of AHK to achieve silence.
  #$silentArgs = ''             # none; make silent with input macro script like AutoHotKey (AHK)
                                #       https://chocolatey.org/packages/autohotkey.portable
  $validExitCodes = @(0)
}

$uninstalled = $false
$local_key     = 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Uninstall\*'
$machine_key   = 'HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\*'
$machine_key6432 = 'HKLM:\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\*'

$key = Get-ItemProperty -Path @($machine_key6432,$machine_key, $local_key) `
                        -ErrorAction SilentlyContinue `
         | ? { $_.DisplayName -like "$softwareName" }

if ($key.Count -eq 1) {
  $key | % {
    $file = "$($_.UninstallString)"

    if ($installerType -eq 'MSI') {
      # The Product Code GUID is all that should be passed for MSI, and very
      # FIRST, because it comes directly after /x, which is already set in the
      # Uninstall-ChocolateyPackage msiargs (facepalm).
      $silentArgs = "$($_.PSChildName) $silentArgs"

      # Don't pass anything for file, it is ignored for msi (facepalm number 2)
      # Alternatively if you need to pass a path to an msi, determine that and
      # use it instead of the above in silentArgs, still very first
      $file = ''
    }

    Uninstall-ChocolateyPackage -PackageName $packageName `
                                -FileType $installerType `
                                -SilentArgs "$silentArgs" `
                                -ValidExitCodes $validExitCodes `
                                -File "$file"
  }
} elseif ($key.Count -eq 0) {
  Write-Warning "$packageName has already been uninstalled by other means."
} elseif ($key.Count -gt 1) {
  Write-Warning "$key.Count matches found!"
  Write-Warning "To prevent accidental data loss, no programs will be uninstalled."
  Write-Warning "Please alert package maintainer the following keys were matched:"
  $key | % {Write-Warning "- $_.DisplayName"}
}


## OTHER HELPERS
## https://github.com/chocolatey/choco/wiki/HelpersReference
#Uninstall-ChocolateyZipPackage
#Uninstall-BinFile # Only needed if you added one in the installer script, choco will remove the ones it added automatically.
#remove any shortcuts you added
tools\ReadMe.md
## Summary
How do I create packages? See https://github.com/chocolatey/choco/wiki/CreatePackages

If you are submitting packages to the community feed (https://chocolatey.org)
always try to ensure you have read, understood and adhere to the create
packages wiki link above.

## Automatic Packages?
Consider making this package an automatic package, for the best 
maintainability over time. Read up at https://github.com/chocolatey/choco/wiki/AutomaticPackages

## Shim Generation
Any executables you include in the package or download (but don't call 
install against using the built-in functions) will be automatically shimmed.

This means those executables will automatically be included on the path.
Shim generation runs whether the package is self-contained or uses automation 
scripts. 

By default, these are considered console applications. 

If the application is a GUI, you should create an empty file next to the exe 
named 'name.exe.gui' e.g. 'bob.exe' would need a file named 'bob.exe.gui'.
See https://github.com/chocolatey/choco/wiki/CreatePackages#how-do-i-set-up-batch-redirects-for-applications-that-have-a-gui

If you want to ignore the executable, create an empty file next to the exe 
named 'name.exe.ignore' e.g. 'bob.exe' would need a file named 
'bob.exe.ignore'. 
See https://github.com/chocolatey/choco/wiki/CreatePackages#how-do-i-exclude-executables-from-getting-batch-redirects

## Self-Contained? 
If you have a self-contained package, you can remove the automation scripts 
entirely and just include the executables, they will automatically get shimmed, 
which puts them on the path. Ensure you have the legal right to distribute 
the application though. See https://github.com/chocolatey/choco/wiki/Legal. 

You should read up on the Shim Generation section to familiarize yourself 
on what to do with GUI applications and/or ignoring shims.

## Automation Scripts
You have a powerful use of Chocolatey, as you are using PowerShell. So you
can do just about anything you need. Choco has some very handy built-in 
functions that you can use, these are sometimes called the helpers.

### Built-In Functions
https://github.com/chocolatey/choco/wiki/HelpersReference

A note about a couple:
* Get-BinRoot - this is a horribly named function that doesn't do what new folks think it does. It gets you the 'tools' root, which by default is set to 'c:\tools', not the chocolateyInstall bin folder. 
* Install-BinFile - used for non-exe files - executables are automatically shimmed...
* Uninstall-BinFile - used for non-exe files - executables are automatically shimmed

### Getting package specific information
Use the package parameters pattern - see https://github.com/chocolatey/choco/wiki/How-To-Parse-PackageParameters-Argument

### Need to mount an ISO?
https://github.com/chocolatey/choco/wiki/How-To-Mount-An-Iso-In-Chocolatey-Package


### Environment Variables
Chocolatey makes a number of environment variables available (You can access any of these with $env:TheVariableNameBelow):

 * TEMP = Overridden to the CacheLocation, but may be the same as the original TEMP folder
 * ChocolateyInstall = Top level folder where Chocolatey is installed
 * chocolateyPackageName = The name of the package, equivalent to the id in the nuspec (0.9.9+)
 * chocolateyPackageVersion = The version of the package, equivalent to the version in the nuspec (0.9.9+)
 * chocolateyPackageFolder = The top level location of the package folder

#### Advanced Environment Variables
The following are more advanced settings:

 * chocolateyPackageParameters = (0.9.8.22+)
 * CHOCOLATEY_VERSION = The version of Choco you normally see. Use if you are 'lighting' things up based on choco version. (0.9.9+)
    - Otherwise take a dependency on the specific version you need. 
 * chocolateyForceX86 = If available and set to 'true', then user has requested 32bit version. (0.9.9+)
    - Automatically handled in built in Choco functions. 
 * OS_PLATFORM = Like Windows, OSX, Linux. (0.9.9+)
 * OS_VERSION = The version of OS, like 6.1 something something for Windows. (0.9.9+)
 * OS_NAME = The reported name of the OS. (0.9.9+)
 * IS_PROCESSELEVATED = Is the process elevated? (0.9.9+)
 
#### Experimental Environment Variables
The following are experimental or use not recommended:

 * OS_IS64BIT = This may not return correctly - it may depend on the process the app is running under (0.9.9+)
 * CHOCOLATEY_VERSION_PRODUCT = the version of Choco that may match CHOCOLATEY_VERSION but may be different (0.9.9+)
    - it's based on git describe
 * IS_ADMIN = Is the user an administrator? But doesn't tell you if the process is elevated. (0.9.9+)
 * chocolateyInstallOverride = Not for use in package automation scripts. (0.9.9+)
 * chocolateyInstallArguments = the installer arguments meant for the native installer. You should use chocolateyPackageParameters intead. (0.9.9+)


Log in or click on link to see number of positives.

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version Downloads Last Updated Status
FollowMee GPS Tracker 1.7 270 Tuesday, April 26, 2016 Approved

1.7 Release


This package has no dependencies.

Discussion for the FollowMee GPS Tracker Package

Ground Rules:

  • This discussion is only about FollowMee GPS Tracker and the FollowMee GPS Tracker package. If you have feedback for Chocolatey, please contact the Google Group.
  • This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
  • The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
  • Tell us what you love about the package or FollowMee GPS Tracker, or tell us what needs improvement.
  • Share your experiences with the package, or extra configuration or gotchas that you've found.
  • If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.
comments powered by Disqus